8-10
BASIC MANUAL
SET MODE
8
8
QSO/RX Log
» SET >
QSO/RX Log
QSO Log
(Default: ON)
Selects whether or not to make a
communication log on a microSD card.
The communication log is made on a microSD
card, and saved in the “csv” format.
L
This function requires a microSD card (User
supplied).
•OFF: The QSO Log function is OFF.
•ON: The transceiver makes a log on the
microSD card. The transceiver starts
making a log when you begin talking.
TIP:
• The folder name is automatically created, as
[IC-705\QsoLog].
• The file name is automatically created, as shown
in the example below:
Log start date and time: 1st January 2020 15:30:00
File name:
20200101_153000.csv
• The log contents are not displayed on the
transceiver.
• You can display the log contents on a PC.
RX History Log
(Default: OFF)
Selects whether or not to make a DV mode’s
receive history log on a microSD card.
The receive history log is made on a microSD
card, and saved in the “csv” format.
L
This function requires a microSD card (User
supplied).
•OFF: The RX History Log function is OFF.
•ON: The transceiver makes a DV mode’s
receive history log on the microSD card.
The transceiver starts making a receive
history log when you finish talking.
TIP:
• The folder name is automatically created, as
[IC-705\RxLog].
• The file name is automatically created, as shown
in the example below:
Log start date and time: 1st January 2020 15:30:00
File name:
20200101_153000.csv
• The log contents are not displayed on the
transceiver.
• You can display the log contents on a PC.
» SET > QSO/RX Log >
CSV Format
Separator/Decimal
(Default: Sep[,] Dec[.])
L
The default value may differ, depending on the
transceiver version.
Selects the separator and the decimal character
for the CSV format.
• Sep [,] Dec [.]: Separator is “,” and Decimal is “.”
• Sep [;] Dec [.]: Separator is “;” and Decimal is “.”
• Sep [;] Dec [,]: Separator is “;” and Decimal is “,”
Date
(Default: mm/dd/yyyy)
L
The default value may differ, depending on the
transceiver version.
Selects the date format between “yyyy/mm/dd,”
“mm/dd/yyyy,” and “dd/mm/yyyy.” (y: year, m:
month, d: day)
EMR
(Default: OFF)
The Enhanced Monitor Request (EMR) function
enables all transceivers that receive an EMR
signal in the DV mode automatically open their
squelch to receive the signal.
•OFF: Turns OFF the function.
•ON: Turns ON the function.
L
The EMR function is automatically turned OFF
when the transceiver is turned OFF.
EMR AF Level
(Default: 50%)
Sets the audio output level when an EMR
communication mode signal is received.
When an EMR signal is received, the audio
will be heard at the programmed level, or the
transceiver’s audio level, whichever is higher.
To disable the setting, set to “0.”
NOTE:
After an EMR signal disappears, the
audio level will remain at the EMR level. In this
case, rotate
to adjust the audio level.