Icom IC-705 Скачать руководство пользователя страница 92

Страница: 92 / 96

III

BASIC MANUAL

ABOUT THE LICENSES

Information on the open source software being used by

this product.

If you modify libpng you may insert additional notices

immediately following this sentence.

This code is released under the libpng license.

libpng versions 1.2.6, August 15, 2004, through 1.6.12,

Glenn Randers- Pehrson, and are distributed according

to the same disclaimer and license as libpng-1.2.5 with

the following individual added to the list of Contributing

Authors:

Cosmin Truta

libpng versions 1.0.7, July 1, 2000, through 1.2.5,

Randers-Pehrson, and are distributed according to the

same disclaimer and license as libpng-1.0.6 with the

following individuals added to the list of Contributing

Authors:

Simon-Pierre Cadieux

Eric S. Raymond

Gilles Vollant

and with the following additions to the disclaimer:

There is no warranty against interference with your

enjoyment of the library or against infringement.

There is no warranty that our efforts or the library will

fulfill any of your particular purposes or needs. This

library is provided with all faults, and the entire risk

of satisfactory quality, performance, accuracy, and

effort is with the user.

libpng versions 0.97, January 1998, through 1.0.6,

Glenn Randers-Pehrson, and are distributed according

to the same disclaimer and license as libpng-0.96, with

the following individuals added to the list of Contributing

Authors:

Tom Lane

Glenn Randers-Pehrson

Willem van Schaik

libpng versions 0.89, June 1996, through 0.96, May

Distributed according to the same disclaimer and

license as libpng-0.88, with the following individuals

added to the list of Contributing Authors:

John Bowler

Kevin Bracey

Sam Bushell

Magnus Holmgren

Greg Roelofs

Tom Tanner

libpng versions 0.5, May 1995, through 0.88, January

Group 42, Inc.

For the purposes of this copyright and license,

“Contributing Authors” is defined as the following set of

individuals:

Andreas Dilger

Dave Martindale

Guy Eric Schalnat

Paul Schmidt

Tim Wegner

The PNG Reference Library is supplied “AS IS”. The

Contributing Authors and Group 42, Inc. disclaim all

warranties, expressed or implied, including, without

limitation, the warranties of merchantability and of

fitness for any purpose. The Contributing Authors and

Group 42, Inc. assume no liability for direct, indirect,

incidental, special, exemplary, or consequential

damages, which may result from the use of the PNG

Reference Library, even if advised of the possibility of

such damage.

Permission is hereby granted to use, copy, modify,

and distribute this source code, or portions hereof,

for any purpose, without fee, subject to the following

restrictions:

1. The origin of this source code must not be

misrepresented.

2. Altered versions must be plainly marked as such

and must not be misrepresented as being the

original source.

3. This Copyright notice may not be removed

or altered from any source or altered source

distribution.

The Contributing Authors and Group 42, Inc.

specifically permit, without fee, and encourage the use

of this source code as a component to supporting the

PNG file format in commercial products. If you use

this source code in a product, acknowledgment is not

required but would be appreciated.

A “png_get_copyright” function is available, for

convenient use in “about” boxes and the like:

printf(“%s”, png_get_copyright(NULL));

Also, the PNG logo (in PNG format, of course) is

supplied in the files “pngbar.png” and “pngbar.jpg

(88x31) and “pngnow.png” (98x31).

Libpng is OSI Certified Open Source Software. OSI

Certified is a certification mark of the Open Source

Initiative.

The contributing authors would like to thank all those

who helped with testing, bug fixes, and patience. This

wouldn’t have been possible without all of you.

Thanks to Frank J. T. Wojcik for helping with the

documentation.

License for CMSIS-RTOS RTX Implementation

Redistribution and use in source and binary forms, with

or without modification, are permitted provided that the

following conditions are met:

- Redistributions of source code must retain the

above copyright notice, this list of conditions and

the following disclaimer.

- Redistributions in binary form must reproduce the

above copyright notice, this list of conditions and

the following disclaimer in the documentation and/

or other materials provided with the distribution.

- Neither the name of ARM nor the names of its

contributors may be used to endorse or promote

products derived from this software without specific

prior written permission.

THIS SOFTWARE IS PROVIDED BY THE

IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS

Содержание IC-705

































































































Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды

Icom IC-705, Основное руководство

Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды