Icom IC-41S Скачать руководство пользователя страница 9

Страница: 9 / 56

PANEL DESCRIPTION

PTT SWITCH [PTT]

(p. 12)

Push and hold to transmit; release to receive.

CH UP/CH DOWN KEYS [CH UP]/[CH DOWN]

Push to select an operating channel, set mode setting, etc.
(pgs. 11, 34)

VOLUME CONTROL [VOL]

(pgs. 10, 11)

Rotate to turn the power ON/OFF and adjusts the audio
level.

EXTERNAL MICROPHONE/SPEAKER JACK

Connect an optional speaker-microphone or headset.

NOTE:

Connect or disconnect the optional equipment

after the transceiver is turned OFF.

FUNCTION DISPLAY

(p. 6)

Displays a variety of information such as an operating
channel number/name, SelCall code, selected function, etc.

SCAN/TAG KEY*

(Scan/Scan Tag)

➥

Push to start or stop the scan. (pgs. 19, 20)

➥

Push and hold for 2 sec. to set or clear the displayed
channel as a TAG (scanned) channel. (p. 18)

• “

” appears when the selected channel is tagged.

(TX Code CH/Call)

➥

Push to enter the SelCall TX code channel selection
mode, then push

[CH Up]

[CH Down]

to select. (CB

channel operation only) (p. 25)

➥

Push and hold for 2 sec. to transmit to the SelCall TX
code channel. (CB channel operation only) (p. 27)

O•G•P/RS KEY*

(Scan Mode/Rpt Scan)

➥

Push to select the scan type from open scan, group
scan and priority scan in order. (p. 18)

• “

” appears when the open scan is selected, “

”

appears when the group scan is selected, and “

” appears

when the priority scan is selected.

➥

Push and hold for 2 sec. to start the repeater scan. (p. 21)

• Repeater output channel ‘CB-R1’ to ‘CB-R8’ operation only

(Quiet/ID-MR)

➥

Push to toggle the quiet function ON or OFF. (CB chan-
nel ‘CB-XX’ operation only) (p. 29)

• “

” appears when the quiet function is turned ON.

➥

Push and hold for 2 sec. to enter the received ID code
history indication mode. (p. 28)

• “

NO ID

” is displayed when no ID code is memorized.

Jack cover

NOTE:

Attach the jack cover when

the optional equipment is not used.
See (p. 3) for details.

Содержание IC-41S

























































Результаты поиска

Содержание IC-41S

Отзывы:

Похожие инструкции для IC-41S

Бренды по названию

Популярные бренды

Icom IC-41S, Инструкция по эксплуатации

Результаты поиска

Содержание IC-41S

Отзывы:

Похожие инструкции для IC-41S

Бренды по названию

Популярные бренды