33
8
OTHER FUNCTIONS
8
■
Wide/Narrow function
This function temporarily/permanently changes the bandwidth
between wide or narrow on the RX channel only.
q
Select the desired RX channel. (p. 31)
w
Enter the RX VFO mode. (p. 31)
e
Push
* to toggle the bandwidth between wide or nar-
row.
r
Push and hold
[Top]
* for 2 sec. to return to the normal
operation condition.
• The bandwidth setting is memorized to the channel.
• Pushing
[Top]
* also returns to the normal operation condition. In
this case, the bandwidth setting is not memorized to the channel.
(temporary operation)
*Regardless of the assigned key function.
■
PTT hold function
The PTT switch can be operated as a one-touch PTT switch
(each push toggles between transmit/receive). Using this
function you can transmit without pushing and holding the
PTT switch.
To prevent accidental, continuous transmission with this func-
tion, the time-out timer function is automatically set to the
transceiver. See p. 12 for details.
q
Turn the power OFF.
w
While pushing and holding
[PTT]
, rotate
[VOL]
to turn
power ON to turn the PTT hold function ON.
• “
P-HOLD ON
” is displayed for 1 sec.
e
Push
[PTT]
to transmit and push again to receive.
• “
” appears while transmitting.
r
Repeat steps
q
and
w
to turn the PTT hold function OFF.
NOTE for the optional microphone operation:
This function does not activate when the PTT switch on the
optional microphone is pushed. And even if the transceiver
transmits with this function, the PTT switch on the optional
microphone must be pushed to speak.
Narrow channel spacing is selected
Wide channel spacing is selected
Содержание IC-41S
Страница 1: ...INSTRUCTION MANUAL i41S UHF C R S TRANSCEIVER ...
Страница 55: ...MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ...