Icom IC-41S, Инструкция по эксплуатации

Страница: 22 / 56

18
5
SCAN OPERATION
■
Scanning preparation
IC-41S scans all tagged channels, and can be selected so
the scan resume condition is a pause or timer scan.
Therefore, these items must be set before starting a scan
(except the repeater search scan). These items must be set
for each scan type (open, group and priority) independently.
D
Scan type selection
➥
Push
(Scan Mode)
several times to select the desired
scan type.
• Open, group and priority scans are available.
• “
OPEN ”, “ GROUP ” or “ PRIO ” is displayed for 1 sec. when each
scan type is selected.
D
Tag channel setting
q
Select the desired scan type. (See at left.)
w
Select the desired channel. (p. 11)
e
Push and hold
(Scan Tag)
for 2 sec. to toggle the tag
channel setting ON and OFF.
• “
S
” appears when the tag setting is ON (The channel is set as a
scan channel).
To speed up scanning:
For open scan, cancel the tag channel setting to skip unde-
sired channels such as usually busy channels.
For group scan, set only often-used channels as tag chan-
nels.
All memory channels may be set as tag channels by
default.
Appears
Push
Push
Open scan is selected.
Group scan is selected.
Priority scan is selected.
Appears
Appears
Appears
Push