Icom FR6000 Series, Руководство по продажам, Страница: 41 / 62

Digital-Analog Cross mode -Setting
Repeater Setting Repeater Setting Repeater Setting Repeater Setting
Analog Repeater
Digital Repeater
RX = f0 TX = f2
RX = f1 TX = f3
1. Frequency and operation mode setting
Operation Mode
＝
Simplex
2. CH Type and CTCSS/DTCS setting
CH Type = Analog
4. External I/O Port Setting
5-1. CTCSS setting
When using CTCSS of the Analog repeater.
Analog Repeater
Operation Mode
＝
Repeat
Analog Repeater
41
CH Type = Analog
CH Type = Mixed-Digital
Necessary to setup when using CTCSS/DTCS.
3. AF Min Level setting
← AF Min Level = 0 is
inhibit Audible output
mode therefore set
AF Min Level = 1
▒ Note Note Note Note: In order to add CTCSS to the modulation input
▒ from the D-SUB 25pin, TX C.Tone setting is necessary
▒ on top of the Multiple table setting.
When using RAN of the Digital repeater
5-2. RAN setting
▒ Note: Note: Note: Note: Digital Repeater setup is not required.
▒ Note: Note: Note: Note: Analog Repeater setup is not required
Digital Repeater
Digital Repeater