Icom FR6000 Series, Руководство по продажам, Страница: 17 / 62

Installation and Connections
Rear panel connections
Rear panel connections Rear panel connections
Rear panel connections
17
Power supply connection Power supply connection Power supply connection Power supply connection
Make sure the repeater’s power is turned OFF when
connecting a DC power cable.
▒ CAUTION: CAUTION: CAUTION: CAUTION: Voltages greater than 16 V DC will damage
▒ the repeater. Check the source voltage before
▒ connecting the power cable.
Mounting the repeater Mounting the repeater Mounting the repeater Mounting the repeater
Using the supplied handle
Using the supplied handle Using the supplied handle
Using the supplied handle
The supplied handles are available for mounting the
repeater into a 19 inch rack. The handles can be
installed to the repeater’s front panel.
1
Attach the supplied handles to both sides of the
repeater’s front panel with the spacers, then tighten
the screws as below.
2
The completed installation should look like
as below.