Icom FR6000 Series, Руководство по продажам, Страница: 30 / 62

4-3 Operation
Receiving and transmitting
Receiving and transmitting Receiving and transmitting
Receiving and transmitting
Repeater operation
Repeater operation Repeater operation
Repeater operation
Ask your dealer for details of the repeater’s
programming.
➥ When the power is turned ON, the [PWR] i [PWR] i [PWR] i [PWR] indicator
lights green.
➥ The [TX] [TX] [TX] [TX] and [BUSY] [BUSY] [BUSY] [BUSY] indicators light simultaneously
while transmitting/receiving a signal.
• The [TX]
[TX] [TX]
[TX] indicator lights red.
• The [BUSY] [BUSY] [BUSY] [BUSY] indicator lights green.
Base station operation Base station operation Base station operation Base station operation
Receiving
Receiving Receiving
Receiving
① Push [POWER] [POWER] [POWER] [POWER] to turn power ON.
② Set the audio and squelch levels.
➥
Rotate [SELECT]
[SELECT] [SELECT]
[SELECT] *1 fully counterclockwise in
advance.
➥
Rotate [VOLUME]
[VOLUME] [VOLUME]
[VOLUME] to adjust the audio output level.
➥
Rotate [SELECT]
[SELECT] [SELECT]
[SELECT] *1 clockwise until the noise
disappears.
③
Push [CH Up] [CH Up] [CH Up] [CH Up] *2 or [CH Down] [CH Down] [CH Down] [CH Down] *2 to select the desired
channel.
•When receiving a signal, the [BUSY] [BUSY] [BUSY] [BUSY] indicator lights
green and audio is emitted from the speaker.
•Further adjustment of [VOLUME] [VOLUME] [VOLUME] [VOLUME] to a comfortable
listening level may be necessary at this point.
*1 When the [SQL Level Up/Down] key function is
assigned to [SELECT].
*2 When the [CH Up]/[CH Down] key functions are
assigned.
Transmitting
Transmitting Transmitting
Transmitting
①
Take the microphone off hook.
②
Wait for the channel to become clear.
③
Push and hold [PTT] [PTT] [PTT] [PTT] to transmit, then speak into the
30
③
Push and hold [PTT] [PTT] [PTT] [PTT] to transmit, then speak into the
microphone at your normal voice level.
④
Release [PTT] [PTT] [PTT] [PTT] to receive.
IMPORTANT:
IMPORTANT: IMPORTANT:
IMPORTANT:
To maximize the audio quality of the transmitted signal:
(1) Pause briefly after pushing [PTT]
[PTT] [PTT] [PTT].
(2) Hold the microphone 1 to 2 inch (2.5 to 5 cm) from
your mouth, then speak into the microphone at a
normal voice level.
*Some function available in analog base station mode
are not available in digital base station mode.