Icom FR6000 Series, Руководство по продажам, Страница: 26 / 62

Connector Description
Port Setting :
Port Setting : Port Setting :
Port Setting :
Assign a function to each port;
For [ For [ For [ For [Ext.I Ext.I Ext.I Ext.I/O 15 to 25] /O 15 to 25] /O 15 to 25] /O 15 to 25]
•
In/Out In/Out In/Out In/Out
Select the type of the assignable function from Input
and Output.
•
Active Logic Active Logic Active Logic Active Logic (Available when "Output" is selected
In/Out
In/Out In/Out In/Out as above)
Select the active logic for the D-sub 25 pin output
from High and Low.
Function Function Function Function----When "Input" is selected in In/Out When "Input" is selected in In/Out When "Input" is selected in In/Out When "Input" is selected in In/Out
•
Null Null Null Null
No function.
•
MCH Select : 1/2/3/4/5 MCH Select : 1/2/3/4/5 MCH Select : 1/2/3/4/5 MCH Select : 1/2/3/4/5
You can select the desired memory channel with the
function. Activate the desired MCH Selects assigned
ports to make the Ext CH No. You can make the Ext
CH No. one of the 32 pre-programmed memory
channels. (see table below) [0]: Hi-Z, [1]: 0 V
CH
CH CH
CH
MCH Select
MCH Select MCH Select
MCH Select
CH
CH CH
CH
MCH Select
MCH Select MCH Select
MCH Select
MCH Select : 1 MCH Select : 1 MCH Select : 1 MCH Select : 1 + 1 CH
MCH Select : 2 MCH Select : 2 MCH Select : 2 MCH Select : 2 + 2 CH
MCH Select : 3 MCH Select : 3 MCH Select : 3 MCH Select : 3 + 4 CH
MCH Select : 4 MCH Select : 4 MCH Select : 4 MCH Select : 4 + 8 CH
MCH Select : 5 MCH Select : 5 MCH Select : 5 MCH Select : 5 + 16 CH
Function
Function Function
Function----When "Output" is selected in In/Out
When "Output" is selected in In/Out When "Output" is selected in In/Out
When "Output" is selected in In/Out
•
Null Null Null Null
No function.
•
Busy Busy Busy Busy
Acts when receiving a carrier signal that is stronger
than the SQL level.
•
Analog Audible Analog Audible Analog Audible Analog Audible
Acts when the mute is released by receiving an
analog signal.
•
Digital Audible Digital Audible Digital Audible Digital Audible
Acts when the mute is released by receiving a digital
signal.
•
Mic Mute
Mic Mute Mic Mute
Mic Mute
Acts while the connected microphone's mute is
released.
•
Hanger
Hanger Hanger
Hanger
Acts while the connected microphone is put down on
its hanger (hanger-on).
•
PTT PTT PTT PTT
Acts while pushing the connected microphone's [PTT]
or Ext.PTT (EPTT).
•
TX TX TX TX
Acts while the repeater is transmitting.
•
Low Voltage 1/2 Low Voltage 1/2 Low Voltage 1/2 Low Voltage 1/2
Acts when the repeater's voltage is lower than the
26
CH
CH CH
CH
MCH Select
MCH Select MCH Select
MCH Select
CH
CH CH
CH
MCH Select
MCH Select MCH Select
MCH Select
5 55 5 4 44 4 3 33 3 2 22 2 1 11 1 5 55 5 4 44 4 3 33 3 2 22 2 1 11 1
1 0 0 0 0 0 17 1 0 0 0 0
2 0 0 0 0 1 18 1 0 0 0 1
3 0 0 0 1 0 19 1 0 0 1 0
4 0 0 0 1 1 20 1 0 0 1 1
5 0 0 1 0 0 21 1 0 1 0 0
6 0 0 1 0 1 22 1 0 1 0 1
7 0 0 1 1 0 23 1 0 1 1 0
8 0 0 1 1 1 24 1 0 1 1 1
9 0 1 0 0 0 25 1 1 0 0 0
10 0 1 0 0 1 26 1 1 0 0 1
11 0 1 0 1 0 27 1 1 0 1 0
12 0 1 0 1 1 28 1 1 0 1 1
13 0 1 1 0 0 29 1 1 1 0 0
14 0 1 1 0 1 30 1 1 1 0 1
15 0 1 1 1 0 31 1 1 1 1 0
16 0 1 1 1 1 32 1 1 1 1 1
Acts when the repeater's voltage is lower than the
Low Voltage 1/2
Low Voltage 1/2 Low Voltage 1/2
Low Voltage 1/2 in the Common screen respectively.
•
Over Voltage
Over Voltage Over Voltage
Over Voltage
Acts when the repeater's voltage is overvoltage.
•
Final Protect
Final Protect Final Protect
Final Protect
Acts when the final protect is activated.
•
Fan State Fan State Fan State Fan State
Acts while the FAN works improperly.
•
RX/TX Unlock RX/TX Unlock RX/TX Unlock RX/TX Unlock
Acts while the RX/TX PLL is unlocked.
•
P0/1/2/3/4 Monitor P0/1/2/3/4 Monitor P0/1/2/3/4 Monitor P0/1/2/3/4 Monitor
Outputs the customized key (P0 to 4) condition when
each key is pushed.
For [Ext. D/A 10] For [Ext. D/A 10] For [Ext. D/A 10] For [Ext. D/A 10]
The Analog Output port can output the Analog signal to
the D/A port.
•
Null Null Null Null
No function.
•
Power Power Power Power----supply Voltage supply Voltage supply Voltage supply Voltage
Outputs the VIN (proportionate to the power-supply
voltage).
•
Temperature Temperature Temperature Temperature
Outputs the TEMPS (proportionate to the
temperature).
•
RSSI
RSSI RSSI
RSSI
Outputs the SD (proportionate to the received
signal's RSSI voltage).
•
EPTT EPTT EPTT EPTT
When the port is activated, the Ext. PTT (EPTT)
function is turned "ON“.
•
Repeat Disable Repeat Disable Repeat Disable Repeat Disable
When the port is activated, the repeater operation is
disabled.
•
TX Disable
TX Disable TX Disable
TX Disable
When the port is activated, the transmission is
disabled.
•
Mic Mute
Mic Mute Mic Mute
Mic Mute
When the port is activated, the connected
microphone is muted.
•
Ext. Key Ext. Key Ext. Key Ext. Key
You can use the port as the customized key. The
same functions in the Key Assign are assignable to
the port.