ELECTRONIC CIRCULATOR FOR SOLAR THERMAL SYSTEMS - Art. S167
FI.S167.EN.C - 03/2023
Icma SpA - Via Garavaglia, 4 - 20012 Cuggiono (MI) ITALY Tel: +39 02 97249134 - +39 02 97249135 - www.icmaspa.it - [email protected]
4
1. SYMBOL DESCRITPION
2. OVERVIEW
Prior to installation, read this installation and operating instructions. The installation and operation should also be in
accordance with national regulations and accepted codes of good practice.
The pump is most suitable for the following uses:
•
Stable heating system with a variable flow
•
Heating system with variable pipeline temperature
•
Industrial circulation system
•
Home heating and domestic water supply system
The pump is equipped with a permanent magnet motor and differential pressure controller which can adjust the
performance of the electric pump automatically and continuously to meet the actual needs of the system.
The pump is equipped with the control panel on the front, which is convenient for the operation of users.
Easy installation and start-up
•
The pump has auto adaptation mode AUTO (factory settings). In most cases, you can
start the pump without need to make any adjustments and automatically adjust it to
meet the actual needs of the system.
•
High comfort
•
The running noise of the pump and the whole system is low.
•
Low energy consumption
•
Compared with the conventional circulating pump, its energy consumption is very
low. The minimum energy consumption of the pump can reach 5W.
Warning
Failure to comply with this security declaration will likely result in personal injury!
Failure to comply with this security declaration will likely cause failure or damage
to the equipment!
Notes or instructions facilitating the work and ensuring operational safety.
CAUTION
NOTE
GPA III series circulating pump(also called abbreviation of “pump”) is mainly used for water circulation in
home heating and domestic hot water system.
2.1 Advantages of installation of the pump
A
B
C
D
E
F
G
A
