7
Note:
While in Cool or Heat mode, once the thermostat turns the system off, a built-in delay keeps the
compressor from turning on for about 5 minutes. This protects the compressor.
4. Put the
Mode
switch to the
Heat
position.
5. Press the button until the temperature setting is at least 3 degrees above room
temperature. The heating system should turn on.
Note:
The compressor may not turn on again for 5 minutes.
6. Put the
Mode
switch to the
Off
position. The heating system should turn off. Once again
the fan may have a delay.
7. Put the
Fan
switch to the
On
position. The blower fan should turn on.
8. Put the
Fan
switch to the
Auto
position. The blower fan should turn off.
If all functions operate properly, the thermostat is installed correctly.
If the thermostat does not operate properly:
• Check all wiring connections
• See Troubleshooting (Page 25)
Cool Off Heat Emer
Auto
On
Auto
On
Cool Off Heat Emer
Mode
Mode
Fan
Fan
Содержание SC2201
Страница 3: ...1 Parts Diagram ...
