FMX 400 P SERIES IR CAMERA USER MANUAL
4
1. General Description
2. Safety Information
FMX 400 Series IR cameras are specially designed to take the body temperature of a
person and to report the total number of persons scanned. The system has been widely
applied for inspection services, and is available for adjunctive use in: hospitals, and sub-
acute healthcare settings public areas, i.e. airports.
•
This device must be installed by qualified service personnel or system installation
personnel.
•
Do take precautions to prevent the lens from being worn, scratched or broken. Avoid
touching the lens to prevent it from being damaged or getting dirty.
•
Given that the uncooled thermal infrared image camera uses a very sensitive thermal
sensor, under no circumstances (powered on or off) should the lens be pointed
directly at a strong radiation source (such as sun, direct or reflected laser beam, etc.),
otherwise permanent damage will be caused to the uncooled thermal imager.
•
This product is a precise electronic device that must be handled with care during use,
storage, and transportation to prevent dangerous actions such as the device being hit
by external force, or falling from heights.
•
During transportation and storage, the ambient temperature must not be lower than
-25 °C, and the original packaging box must be used during transportation.
•
Prior to start of the device, make sure that the power supply is properly connected. If
the power supply is connected incorrectly, the device may be damaged.
•
Do not place any objects on the power cord, and do not place the device where the
power cord can be easily touched.
•
If the device operates abnormally, please contact the supplier and do not dismantle
the device on your own.
•
Do not drop or throw the device.
•
Do not put the product into a fire.
•
It is recommended to calibrate the device annually.
3. Intended Use
FMX 400 Series IR cameras are designed for body surface temperature measurement of
infants and adults without contacting the human body.
