FMX 400 P SERIES IR CAMERA USER MANUAL
13
8. Computer Setup
8-1 IP Address Configuration
The FMX 400 comes configured with static IP address for the infrared camera. The infrared
camera lies at 192.168.1.123. Connecting the computer requires setting the IPv4 settings
of the Ethernet port to a static IP address in the same “Class C.” We suggest applying
192.168.1.110 with a subnet mask of 255.255.255.0. There is no need to set a gateway as
this is a direct connection from the computer to the cameras with no router.
Be sure the static IP address is set by doing the following:
1. Click on Windows icon.
2. Click on Settings.
3. Click on Network and Internet.
4. Click on Ethernet.
5. Click on Change Adapter Settings.
6. Right click on Ethernet and choose properties.
7.
Double click on Internet Protocol Version 4 (TCP/IPV4) Properties.
8. The IP address should read 192.168.1.110. If it does not, click in the box and fill in the
correct number.
9. The Subnet Mask should read 255.255.255.0. If it does not, click in the box and fill in
the correct number.
10. Click Ok.
