Monitor Components
The Choice of Power Supply
1.
Battery powered mode:
6V DC 4×AAA batteries
2.
AC adaptor powered mode:
6V
1A
(Can be supplied by AC adaptor model
UE08WCP-060100SPA !)(Not Included)
DC POWER SOCKET
INQUIRY BUTTON
USER 1
USER 2
Please unplug the adaptor to depart from
the using utility power.
Note:
The adaptor interface is located on the right side of the monitor. Place NO obstacles
on the right side for easy pull-off adaptor.
Component list of
pressure measuring system
1 Cuff
2 Air pipe
3 PCBA
4 Pump
5 Valve
LCD DISPLAY
BATTERY COMPARTMENT
Installing and Replacing the Batteries
1. Open the battery door.
2. Insert the batteries according to the polarity
indications.
3. Close the battery door.
List
1.Blood Pressure Monitor
3. 4×AAA batteries
6
2.Cuff (Type BF applied part) (22cm-32cm)
(Please use iChoice authorized cuff.
The
size of the actual cuff please refer to
the
label on the attached cuff.)
4.User manual
7
CAUTION
In order to achieve the best performance and protect your monitor,
please use the authorized / specified battery and power adaptor.
Replace the batteries under following circumstances:
displays on the LCD.
The LCD display dims.
When powering on the monitor, the LCD doesn’t light up.
CAUTION
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
Do not dispose of batteries in fire. Batteries may explode or leak.
AC adaptor
CUFF
AIR PIPE
AIR CONNECTOR PLUG
INTRODUCTION
BEFORE YOU START
