INTRODUCTION
INTRODUCTION
2
3
General Description
Thank you for selecting iChoice Wireless blood pressure monitor.
The
monitor features blood pressure measurement, pulse rate measurement and the
result storage. The design provides you with two years of reliable service.
Readings taken by the monitor are equivalent to those obtained by a trained
observer using the cuff and stethoscope auscultation method.
This manual contains important safety and care information, and provides step
by step instructions for using the product.
Read the manual thoroughly before using the product.
Features:
125mm x 47mm Blue LCD display with white backlight
Up to 60 pieces of record stored for each user
Measuring during inflation technology
Indications for Use
1. The iChoice Wireless Blood Pressure Monitor is digital monitors intended
for use in
measuring blood pressure and heartbeat rate with arm
circumference ranging
from 22 cm to 32 cm ( about 8¾˝-12½˝ ) .
2. The monitor detects the appearance of irregular heartbeats during
measurement and gives a warning signal with readings.
3. It is intended for adult use in the home/domestic setting only.
Contraindications
1. The device is contraindicated for any person who is connected to a
wearable or implantable electronic device or instrument such as a
pacemaker or defibrillator.
2. The device is not intended to be a diagnostic device. Contract your
physician if hypertensive values are indicated.
Measurement Principle
This product uses the Oscillometric Measuring method to detect blood pressure.
Before every measurement, the unit establishes a “zero pressure” equivalent to
the air pressure. Then it starts inflating the arm cuff, meanwhile, the unit detects
pressure oscillations generated by beat-to-beat pulsatile, which is used to determine
the systolic and diastolic pressure, and also pulse rate. The device also compares
the longest and the shortest time intervals of detected pulse waves to mean time
interval then calculates standard deviation. The device will display a warning signal
with the reading to indicate the detection of irregular heartbeat when the difference
of the time intervals over.
Safety Information
The signs below might be in the user manual, labeling or other component.
They are the requirement of standard and using.
Symbol for “THE OPERATION
GUIDE MUST BE READ
”
Symbol for “TYPE BF APPLIED
PARTS”
Symbol for “MANUFACTURER”
Symbol for “ENVIRONMENT
PROTECTION – Electrical waste
products should not be disposed of
with household waste. Please follow
local guidelines.”
SN
Symbol for “SERIAL NUMBER”
Symbol for “DIRECT CURRENT”
Symbol for “MANUFACTURE
DATE”
Symbol for “Including RF
transmitter”
Caution: These notes must be
observed to prevent any
damage to the device.
Storage & transportation
condition
Ingress of Protection
IP22
