8
Warning
For cleaning and maintenance, pull off the power plug and close
Be sure to clean the condenser filter on the front panel one or
Install the product in the place where the temperature is within
Use the product while the supply pressure is within 1 to 5 kgf/
㎠
When installing the product, be sure to connect to the cold water
■
the water supply valve. Perform the work after the operation stops.
more times in a month.
5 to 38
℃
(41 ~ 100.4
℉
).
(14.22 ~ 71.12 psig)and the water temperature is within
5 to 32
℃
(41~ 89.6
℉
).
pipeline.
- It may cause an electric shock or injury.
- When dust is accumulated in the condenser filter, ventilation is not made. So it may
cause low product performance, excess electric charge, and product failure.
- In case of 5
℃
(41
℉
)or below, it may cause winter snowing.
- In case of 38
℃
(100.4
℉
)or above, it may cause a product failure.
- It may cause an electric shock or injury.
-If you connect to the hot water pipeline, it may cause a product failure.
