24
24
Inspection Items
- This ice maker contains the ice box.
- When the ice level reaches the limit, the automatic sensor
stops the ice making operation.
- When ice is removed from the ice maker, the automatic
sensor starts the ice making operation so new ice can be
made.
- This ice maker operates automatically.
Sensor system
1. Ice full sensor
2. Ice thickness sensor
- To maintain the ice bridge thickness of 3.2 mm(0.12in),
the height of the sensor is fixed by factory default.
- When ice is too thick, rotate the control counter-
clockwise for adjusting the thickness.
- If you want to make the ice thicker, rotate the
control screw clockwise. To make it thinner,
rotate the control screw counter-clockwise.If you
rotate the control screw one round, as shown in
the right figure, the sensor moves in the arrow
direction and the ice thickness is adjusted by
0.7mm(0.03in).
- Periodically clean the sensor part.
When contaminated, the ice may not be even
in thickness.
Wire
Bracket
Sensor
Ice
Sensor
Bridge
Control Screw
Caution
Be careful for the wire and bracket of the ice thickness sensor not to limit the sensor movement.
