icetro ID-0300-AN, Инструкция по установке и обслуживанию

Страница: 30 / 45

Disassembly ID-0300
Removal and Replacement of Water Reservoir & Float Switch
1. Turn off the power switch and the circuit breaker, unplug the power cord from the outlet, remove the top, front
and right-side panels, and close the valve on the water supply line.
2. Remove the clear tube and clamp connecting the water reservoir to the dump solenoid, at the reservoir.
3. Lift the fill spout out of the reservoir cover.
4. Remove 3 fixing screws to loosen the water reservoir mounting plate and remove the mounting plate and reservoir
assembly out to access the water level sensor.
5. Separate the water reservoir from the reservoir cover.
6. Remove the float switch from the reservoir cover.
7. Reassemble the parts in reverse order from teardown.
8. Reassemble the panels in their correct positions, connect the power cord to the outlet, turn on circuit breaker, and
turn on the main power switch.
9. Open the valve on the water supply line.
10. Switch the ICE-OFF-WASH switch to the 'ice' position to ensure that the water fills/drains well and check for leaks.
Water
Reservoir
Water Fill Tube
Float Switch
Clamp
Fill Spout
Screw
Screws
30