iCEBOX PFU-45-067, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 26

GENERAL SAFETY
GUIDELINES
INTENDED USE
WARRANTY OF THE
PRODUCT
IceBox fan coil units are a custom designed and built product to suit
particular project requirements and are supplied in accordance with the
approved construction drawings.
This operation manual is intended for use by rigging sub-contractors,
installing contractor and service personnel working on the IceBox units.
Failure to comply with any of these requirements could result in serious
damage to the equipment, the property in which it is installed, as well as
severe personal injury or death to themselves and people at the site. It
is expected that the personnel installing or servicing the IceBox units are
qualified accordingly to enable the individual to perform the assigned
tasks properly and safely. It is essential that, prior to performing any
task on this equipment, this individual shall have read and understood
the on-product labels, this document and any referenced materials. The
individual shall also be familiar with and comply with all applicable
industry and governmental standards and any regulations pertaining to
the task in question.
During rigging, installation, operation, maintenance and service of the
IceBox units, an individual may be exposed to certain components or
conditions including, but not limited to: heavy objects, materials under
pressure, rotating components and electrical voltage. Each of these items
has the potential, if misused or handled improperly, to cause serious
damage to property, equipment or personnel. It is the obligation and
responsibility of the installer and operating service personnel to identify
and recognize these inherent hazards, protect themselves, and proceed
safely in completing their tasks.
IceBox units are manufactured to create a desired indoor air quality, air
temperature, humidity or to filter normal or contaminated air.
IceBox units are suitable for both indoor or outdoor operation, in a
temperature range from -20.0°C to +60.0°C and for the supplied air
conditions from -20.0°C to +45.0°C. Any operation outside of these
conditions must be agreed in writing by Oceania Solutions Group.
Any additional changes to the supplied equipment of third party
components will be the responsibility of the individual or company whom
installed them, not Oceania Solutions Group.
IceBox units are supplied with a 12 month warranty on parts. A labour
and parts warranty can be obtained at the time of purchasing the units.
Please contact your local IceBox agent for details.
The warranty can be null and void if any modifications are carried out
without prior written approval from Oceania Solutions Group for the
IceBox units.
For the parts warranty to be upheld, the following conditions must be
satisfied:
1. All of the scheduled maintenance and operations detailed in this
manual must be performed at the specified times by suitably trained
and qualified service personnel.
2. Only genuine and approved spare parts by Oceania Solutions
Group must be used. Please contact Oceania Solutions Group or
your local IceBox agent for details.
3. Failure to satisfy any of these conditions will automatically void the
warranty.
A full copy of our terms and conditions of warranty is available on our
website.
4 | ICEBOX FAN COIL UNITS IOM