background image

EF and EMF Series

 

     

 Forward

 

 

Page i 

 

How To Use This Manual 

 
ICE-O-Matic provides this manual as an aid to the service technician in installation and maintenance of the 

EF and 

EMF Series 

flake ice machines.  Do not attempt to perform installation, start-up or maintenance unless you have 

read and fully understand this manual. 
 
If, at any time, you encounter conditions that are not addressed in this manual, call, E-mail or write the ICE-O-Matic 
Service Department:  
 
ICE-O-Matic  

 

11100 E. 45

th

 Ave. 

Denver, Co. 80239 
Attn: Technical Service Department 
E-Mail: [email protected]  
 
Telephone Numbers 

 

 

 

Any Service communication must include: 

800-423-3367 All 

Departments   

 

 Model Number 

888-349-4423      Technical Assistance Only 

 

 Serial number 

303-371-3737 

     

 A detailed explanation of the problem 

 

Keep this manual for future reference. 
 

The EF and EMF Series Service Parts Manuals are available separately. 

 
ICE-O-Matic icemakers and dispensers are not approved for outdoor installation. 
 
WARNING:  Always disconnect electrical power and shut off water supply whenever maintenance or 
repairs are performed on the ice machine and related equipment. 
 
CAUTION:  Always wear protective eyewear whenever maintenance or repairs are performed on the ice 
machine and related equipment 

Содержание Series 250 through 2306























Отзывы: