5
2
Overview of Navigation and Controls
Connect the device to the monitor and then connect a mouse and power cable. Click the power
button at the front panel and then boot up the device to view the analog video output. You can
use the mouse to implement some GUI operation.
Right click mouse, you can see system pops up the login interface for you to input user name
and password.
You can use USB mouse to input. Click
to switch between numeral, English character
(small/capitalized) and denotation.
Note:
For security reason, please modify password after you first login.
Within 30 minutes, three times login failure will result in system alarm and six times login failure
will result in account lo
Figure 2-1
After device booted up, the system is in multiple-channel display mode. See Figure 2-2.Please
note the displayed window amount may vary. The following figure is for reference only.
Figure 2-2
You can overlay the corresponding date, time and channel name on each screen. You can refer
to the following sheet for channel record or alarm status information.
