User’s Guide
Page 7 of 34
7). Please wear anti-static wrist strap when change the interface board,to avoid the static
electricity damage the board.
2.2 Check Installation Environment
The switch is for indoor use only, please pay attention to the following problems when install
the switch in a cabinet or put the device directly on the desktop.
1)
The air vents of switch must have enough space to dissipate the heat inside enclosure.
2)
A good heat dissipation system in the cabinet or on the desktop.
3)
The cabinet or desktop strong enough to support the weight of switch and installation
accessories.
4)
Safe ground connection for the cabinet or desktop.
2.3 Installation Tools
1) Flathead screw driver
2) Cross screw driver
3) Anti-static wrist strap
Chapter 3 Installation
3.1 Install the Switch
3.1.1 Install the switch on a 19 inch standard cabinet
1) First fix the provided two L-shaped brackets on the two sides of switch.
2) Fix the switch on the rack with screws(screws are not provided).
Picture 3.1.1 Cabinet Installation
3.1.2 Install the switch on the desktop
When there is no 19 inch standard cabinet, the switch is usually put on clean desktop. The
operation is easier, please follow the below instructions:
1)
Keep the desktop stable and safely grounded.
2)
Set aside 10cm space around switch for heat dissipation.
