User’s Guide
Page 17 of 34
Chapter 3 Basic Configuration
3.1 IP Configuration
Picture 3.1.1 IP configuration
The above IP address configuration page can be used to configure the IP address of
device management interface
“Interface Vlan 1”. The default IP address, subnet mask
and gateway will be showed in the page. When revise the configuration, please press
“save” to confirm new configuration. Press “reset” to back to original configuration.
Above configuration need to be done under default
“Static” state,if switch the IP address
mode to DHCP, IP address will be get dynamically. Please record the new IP address for
future login.
Notice: Don
’t modify the subnet mask unless exceptional case, login problem will be caused by
improper modification.
3.2 Account Configuration
Picture 3.2.1 Account configuration
Login password can be revised in this page, please remember the new password for
