User’s Guide
Page 26 of 34
management, including anapplication layer protocol, a database schema, and a set of
data objects. SNMP is used mostly in network management systems to monitor
network-attached devices for conditions that warrant administrative attention.
4.11.2 SNMP Community configuration
Picture 4.11.2 SNMP Community Configuration
Configure SNMP common identifiers, switches with same community identifier can make
unified management.
4.11.3 Trap Configuration
Picture 4.12 Trap Configuration
SNMP trap is a message used in SNMP protocol, the device can send a trap message to
SNMP manager when they experience a problem, rather than waiting for the polling of
SNMP manager.
4.12 PoE Management
Trap Configuration
From above interface 4.9
.1,you can find “Enable/disable”to enable or disable PoE supply
power to powered device.
From the Priority,you can find Low,Middle and High to ensure power output of the port
with the highest priority. You can check current currency from column“(mA)”,Voltage from
column
“
（
V
）
”
