IBM xSeries 366, Руководство по диагностике и обслуживанию

Страница: 50 / 184

POST and SMI error messages
BIOS can log two types of error messages in the BMC log and the system-error log:
POST events, which occur during system startup, and SMI events, which are
generally run time errors detected by hardware. The following table describes the
possible POST and SMI error messages and suggested actions to correct the
detected problems.
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, Type 8863,” on page 105 to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error message Action
POST reporting Processor Event: Invalid
configuration of processor card. Chassis
Number = X.
Make sure that all microprocessors have the same part number.
POST reporting Processor Event: Processor
mismatch detected. Chassis Number = X.
Processor Number = Y.
1. Make sure that the BIOS code is at the latest level.
2. Make sure that all microprocessors have the same part
number.
3. (Trained service technician only) Replace the microprocessor.
POST reporting Processor Event: POST does
not support current stepping of processor.
Chassis Number = X, Processor Number = Y.
1. Make sure that the BIOS code is at the latest level.
2. Make sure that all microprocessors have the same part
number.
3. (Trained service technician only) Replace the microprocessor.
POST reporting Processor Event: Unable to
apply microcode (patch) update. Chassis
Number = X. Processor Number = Y.
(Trained service technician only) Replace the microprocessor.
POST reporting Processor Event: Processor
failed BIST. Chassis Number= X. Processor
Number = Y.
(Trained service technician only) Replace the microprocessor.
POST reporting memory event: North Bridge
Uncorrectable memory error occurred. Chassis
Number = X. Memory Card = Y. Memory DIMM
= Z.
1. Reseat the DIMM.
2. If the DIMM was disabled by the user, run the
Configuration/Setup Utility program and enable the DIMM.
3. Replace the DIMM.
4. If the DIMM was disabled by the user, run the
Configuration/Setup Utility program and enable the DIMM.
POST reporting memory event: North Bridge
Correctable memory threshold occurred.
Chassis Number = X. Memory Card = Y.
Memory DIMM = Z. Failing Symbol = 0xcb.
1. Reseat the DIMM.
2. If the DIMM was disabled by the user, run the
Configuration/Setup Utility program and enable the DIMM.
3. Replace the DIMM.
4. If the DIMM was disabled by the user, run the
Configuration/Setup Utility program and enable the DIMM.
POST reporting memory event: DIMM Disabled -
Failed ECC Test. Chassis Number = X. Memory
Card = Y. Memory DIMM = Z.
1. Reseat the DIMM.
2. If the DIMM was disabled by the user, run the
Configuration/Setup Utility program and enable the DIMM.
3. Replace the DIMM.
4. If the DIMM was disabled by the user, run the
Configuration/Setup Utility program and enable the DIMM.
34
IBM xSeries 366 Type 8863: Problem Determination and Service Guide