IBM xSeries 235, Техническое обслуживание и устранение неисправностей

Страница: 155 / 214

Note: See “System” on page 156 to determine which components should be replaced by a field service technician.
Error code/symptom FRU/action
1762 (Hard disk configuration error)
1. Hard disk drive.
2. Hard disk cables.
3. Run the Configuration/Setup Utility program.
4. Hard disk adapter.
5. SCSI backplane.
6. System board.
178X (Fixed disk error)
1. Hard disk cables.
2. Run diagnostics.
3. Hard disk adapter.
4. Hard disk drive.
5. System board.
1800 (No more hardware interrupt
available for PCI adapter)
1. Run the Configuration/Setup Utility program.
2. Failing adapter.
3. System board.
1962 (Drive does not contain a valid boot
sector)
1. Verify that a startable operating system is installed.
2. Run diagnostics.
3. Hard disk drive.
4. SCSI backplane.
5. Cable.
6. System board.
2400 (Video controller test failure)
1. Video adapter (if installed)
2. System board
2462 (Video memory configuration error)
1. Video adapter (if installed)
2. System board
5962 (IDE CD-ROM drive configuration
error)
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
8603 (Pointing-device error)
1. Pointing device
2. System board
0001200 (Machine check architecture
error)
1. Microprocessor 1
2. Optional microprocessor 2
00012000 (Microprocessor machine
check)
1. Microprocessor
2. System board
00019501 (Microprocessor 1 is not
functioning - check VRM and
microprocessor LEDs)
1. VRM 1
2. Microprocessor 1
3. System board
00019502 (Microprocessor 2 is not
functioning - check VRM and
microprocessor LEDs)
1. VRM 2
2. Microprocessor 2
Chapter 6. Symptom-to-FRU index
145