IBM Ultrastar 36LZX, Технические характеристики

Страница: 182 / 249

8.42.1 Combined Header And Data (Mode 0000b)
In this mode, the data to be transferred is preceded by a four-byte header.
Buffer ID must be zero. If another value is specified, no download function is performed and the com-
mand is terminated with CHECK CONDITION status. And the drive shall set the sense key to ILLEGAL
REQUEST and additional sense code to ILLEGAL FIELD IN CDB.
Buffer Offset must be zero. If another value is specified, no download function is performed and the
command is terminated with CHECK CONDITION status. And the drive shall set the sense key to
ILLEGAL REQUEST and additional sense code to ILLEGAL FIELD IN CDB.
Parameter List Length specifies the number of bytes that shall be transferred during the DATA OUT
phase. This number includes four bytes of header, so the data length to be stored in the drive buffer is
transfer length minus four. If the length exceeds the buffer size, the command is terminated with CHECK
CONDITION status. And the drive shall set sense key to ILLEGAL REQUEST and additional sense code
to ILLEGAL FIELD IN CDB.
The four-byte header consists of all reserved bytes.
Reserved = 0 3
Reserved = 0 2
Reserved = 0 1
Reserved = 0 0
0 1 2 3 4 5 6 7
Bit
Byte
Figure 161. WRITE BUFFER Header
8.42.2 Write Data (Mode 0010b)
In this mode, the DATA OUT phase contains buffer data.
Buffer ID must be set to zero, indicating the data transfer buffer. If another value is specified, the
command is terminated with CHECK CONDITION status. The drive shall set the sense key to ILLEGAL
REQUEST and additional the sense code to ILLEGAL FIELD IN CDB.
Buffer Offset specifies the offset of the memory space specified by the Buffer ID. The initiator should
conform to the offset boundary requirements returned in the READ BUFFER descriptor. If the value
exceeds the buffer specified, the command is terminated with CHECK CONDITION status. The drive
shall set the sense key to ILLEGAL REQUEST and additional sense code to ILLEGAL FIELD IN CDB.
Parameter List Length specifies the Parameter List Length. It must be
Ÿ
less than the capacity of the buffer size and
Ÿ
on a sector boundary.
If an invalid value is specified, the command is terminated with CHECK CONDITION status. The drive
shall set the sense key to ILLEGAL REQUEST and additional sense code to ILLEGAL FIELD IN CDB.
Ultrastar 36LZX hard disk drive specifications
182