IBM TotalStorage SAN140M, Инструкция по установке и обслуживанию

Страница: 66 / 428

SAN140M Installation and Service Manual 34
8. Selectively perform the following tasks according to customer
requirements:
• Product - includes identification, date and time, parameters,
fabric parameters, and network addresses.
• Ports - includes basic information, buffer-to-buffer credits
(BB_Credits), and N_Port identifier virtualization (NPIV).
• Management - includes SNMP trap message recipients,
command line interface (CLI), open systems management server
(OSMS), secure socket layer (SSL) encryption.
• Options - includes product feature enablement (PFE) keys.
• Security - includes SANtegrity authentication (settings, access
control list, and remote authentication dial-in user service
(RADIUS) server support), Enterprise Fabric Mode, and
SANtegrity binding (fabric, switch, and port binding).
• Interswitch links - includes OpenTrunking, preferred path, and
interswitch link (ISL) port fencing.
Configure director identification
Perform this procedure to configure the director identification. The
Name, Location, and Contact variables correspond respectively to the
SNMP variables sysName, sysLocation, and sysContact, and are used by
management workstations when obtaining director data.
1. Select Switch and Identification from the Configure menu at any
view. The Identification View displays ( Figure 16 ).
a. Type a unique director name of 24 alphanumeric characters or
less in the Name field. If installed on a public LAN, the name
should reflect the director Ethernet network domain name
system (DNS) host name.
b. Type a director description of 255 alphanumeric characters or
less in the Description field.
c. Type the director physical location (255 alphanumeric
characters or less) in the Location field.
d. Type the name of a contact person (255 alphanumeric
characters or less) in the Contact field.
2. Click OK to save and activate changes.