IBM TotalStorage SAN140M, Инструкция по установке и обслуживанию

Страница: 135 / 428

103 Chapter 3: Maintenance analysis procedures (MAPS)
NO YES
↓
A FRU failure, power-on self-test (POST) failure, link
incident, interswitch link (ISL) problem, fenced E_Port, or
segmented E_Port is indicated. To obtain event codes that
identify the failure, go to
step 10 .
4
Is the product management interface (browser PC, management
server, or OSI host console) powered on and operational?
NO YES
↓
Go to step 7 .
5
Power on the management interface platform and launch the
associated management application:
• EFCM Basic Edition - ( Task 4: Configure director at the EFCM Basic
Edition interface (optional) on page 33).
• SAN management application - ( Task 6: Configure server
password and network addresses on page 55 and Access the
management server desktop on page 57).
• OSI host console - Refer to documentation supplied with the
host system for instructions.
Was the maintenance action successful?
NO YES
↓
Go to step 7 .
6
Inspect the management interface for communication link failure.
Observe one of the following:
• A Page cannot be found, Unable to locate the server, HTTP 404
- file not found , or similar message (browser PC).
• The icon representing unknown status displays in the status area
(SAN management application).
Was a failure indication observed?
NO YES
↓
Communication between the product and management
interface failed. Go to
MAP 0300: Loss of server communication .
Exit MAP.