IBM TotalStorage SAN140M, Инструкция по установке и обслуживанию

Страница: 375 / 428

343 Appendix D: Restore management server
8. Configure Windows 2000 configuration information as required
by the customer:
a. Configure the computer and workgroup names for the server.
If required, change the server gateway address and DNS
server IP address to conform to the customer LAN addressing
plan (
Task 7: Configure management server information on
page 57).
b. Change the default Windows 2000 administrator password
and configure password access for authorized users.
c. Set the server date and time.
d. Configure the call-home feature.
9. Insert the EFC Management Applications CD-ROM in the CD-RW
drive and close the LCD panel.
10. At the server Windows 2000 desktop, click Start at the left side of
the task bar, then select the Run option. The Run dialog box
displays.
11. At the Run dialog box, type
D:\mcdataServerInstall
in the
Open field.
12. Click OK. A series of message boxes appear as the InstallAnywhere
third-party application prepares to install the SAN management
software, followed by the EFC Management Applications dialog
box.
13. Follow the online instructions for the InstallAnywhere program.
Click Next, Install, or Done as appropriate.
14. Remove the EFC Management Applications CD-ROM from the
CD-RW drive.
15. Insert SAN management data directory backup CD-ROM
(created while performing Task 19: Back up configuration data on
page 89) in the CD-RW drive and close the LCD panel.
16. Copy the contents of the CD-ROM to the server hard drive:
• For the EFCM 8.5 application, copy the CD-ROM contents to
the following directories:
— C:\Program Files\EFCM 9.0\CallHome
— C:\Program Files\EFCM 9.0\Client
— C:\Program Files\EFCM 9.0\Server.