IBM TotalStorage SAN140M, Инструкция по установке и обслуживанию

Страница: 167 / 428

135 Chapter 3: Maintenance analysis procedures (MAPS)
NO YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
14
A port is set to an inactive state.
a. At the Event Log, examine the first two bytes of event data.
b. Byte 0 specifies the port reporting the problem. Byte 1 specifies
the inactive reason ( Table 17 ).
15
A port is inactive because Flexport Technology is disabled. Install the
Flexport Technology PFE key to enable N_Port capability (
Task 15:
Configure PFE key (optional) on page 70 and Install PFE keys (optional)
on page 47). Exit MAP.
16
A port is inactive because the:
• Port cannot operate at the product (backplane) speed.
• Optical transceiver does not support the configured port speed.
Change the port speed to be compatible with the backplane or optical
transceiver speed.
a. For the product reporting the problem:
— EFCM Basic Edition - Select Ports and Basic Info from the
Configure menu at any view. The Basic Information View
displays.
— Element Manager - Select Ports from the Configure menu
at any view. The
Configure Ports
dialog box displays.
Table 17
Inactive port reasons and actions
Byte 1 Inactive port reason Action
02 Feature key not enabled. Go to step 15 .
03 Switch speed conflict. Go to step 16 .
04 Optics speed conflict. Go to step 16 .
06 Port swap conflict. Go to step 17 .