IBM TotalStorage Network Attached Storage 300G, Справочник пользователя

Страница: 30 / 86

The IP address used by the workstation must be obtained automatically. If the
network interface card for the workstation is configured to obtain an IP address
automatically, go to step 6. However, if the network interface card for the
workstation is configured to use a static IP address, you must set the IP
Address and Subnet mask properties as follows:
a. Set the IP address.
If the workstation’s network interface card is configured to use a static IP
address, you must configure it to obtain an IP address automatically.
b. Set the Subnet mask to: 255.255.0.0
Notes:
a. You might be prompted to restart the workstation after you have changed
the configuration.
b. Do not be concerned if you do not have a DHCP server on your network.
This configuration automatically assigns an unused IP address to the
workstation that is on the same subnet as the Model G00 appliances
attached to the LAN.
c. If you are not certain how to check the workstation network TCP/IP protocol
configuration settings, refer to the Microsoft Windows documentation that
came with your workstation for network configuration instructions.
Connecting to Terminal Services
To connect to Terminal Services from your workstation, do the following:
1. If you will be using the Terminal Services Client, start the Terminal Services
Client and go to step 2 on page 18. Otherwise, if you will be using the Windows
2000 Terminal Services Web Connection page in the UM Services browser, start
the UM Services browser, log in, and then select Windows 2000 Terminal
Services in the Appliances tab in the left pane of the UM Services browser.
This procedure is described in step 3 on page 16.
2. In the Server field, enter the IP address or the computer name of the Model
G00. The computer name is predefined as IBM5196-xxxxxxx, where xxxxxxx is
the serial number located in the lower right corner of the bezel on the front of
the appliance. If you have changed the computer name from the predefined
value, use that name instead.
For Size, select a size other than full screen in which the Model G00 desktop
will appear, then click Connect to start the Terminal Services Client session. A
user log in window appears.
Log in. Type Administrator in the Username field, type password in the
password field, and then click OK to log in. Once you have logged in, you can
begin using Terminal Services Client to configure and manage your Model G00.
Once you have logged into Terminal Services, you can perform administrative tasks
on the Model G00, as if your keyboard, mouse, and monitor were directly attached
to it. The Model G00 desktop contains a shortcut, titled IBM NAS Admin, to a
special console, the IBM NAS Administration console.
IBM NAS Administration console
The IBM NAS Administration console contains all of the standard functions that are
contained in the standard Computer Management console available on any
Windows 2000 desktop, plus the following functions specific to the Model G00:
v
NAS Backup Assistant
v
Persistent Storage Manager
18
300G User’s Reference