IBM TotalStorage Network Attached Storage 300G, Справочник пользователя

Страница: 28 / 86

your appliance and configure the Network settings using the Windows Control
Panel. Once you have configured the network settings for your appliance, you are
ready to use UM Services.
To start UM Services:
1. Start your Web browser and then, in the Address or Location field of the
browser, enter:
http:// ip_address :1411
where ip_address is the IP address of the Model G00, and then press Enter.
Or, type:
http:// computer_name :1411
where computer_name is the computer name of the Model G00. The computer
name is predefined as: IBM5196-xxxxxxx, where xxxxxxx is the serial number
located in the lower right corner of the bezel on the front of the appliance.
If you have changed the computer name form the predefined value, use that
name instead. After you have entered the computer name, press Enter.
2. A user log in window appears. Type Administrator in the Username field, and
type password in the Password field. You can leave the Domain field blank.
Make sure the “Save this password in your password list ” checkbox is not
checked, and then click OK.
Note: To ensure system security, use Windows Powered to change the
Administrator password from “password” to something else. Once you
do, or if you create another user in the Administrator group in the future,
use your new surname/password combination instead of the default
username/password combination.
The first time you connect you may be prompted to install XML and Swing
components. Follow the on-screen instructions to install these components and
then close and restart Internet Explorer before you proceed.
3. You are now connected to the Model G00 through UM Services. In addition to
the standard UM Services functionality, your appliance includes functionality for
administering the appliance, available from the Appliances tab in the left pane of
the UM Services browser. The default view (in the right pane of the UM
Services browser) when you connect to your appliance is Windows 2000 for
NAS. The other selectable view in the Appliances tab is Windows 2000 Terminal
Services, which displays a Terminal Services Web Connection page.
To start Windows 2000 for NAS, click Administer this server appliance in the
right pane of the UM Services browser. To connect to the Model G00 and
manage it as though you were running Terminal Services Client from your
desktop, select Terminal Services in the Appliances tab of the UM Services
browser, and then follow the instructions for connecting to the Model G00 using
Terminal Services described in “Terminal Services and the IBM NAS
Administration Console” on page 17.
These administration tools are described further in the remainder of this chapter.
16
300G User’s Reference