IBM TotalStorage DS4300 Turbo, Инструкция по установке, использованию и обслуживанию

Страница: 64 / 220

v For SFP modules containing wire tabs, unlock the SFP module latch by
pulling the wire latch outward 90°, as shown in Figure 23.
3. With the SFP latch in the unlocked position, extract the SFP module.
v
For SFP modules containing plastic tabs, slide the SFP module out of the
port.
v For SFP modules containing wire tabs, grasp the wire latch and pull the SFP
module out of the minihub port.
4. Replace the protective cap on the SFP module.
5. Place the SFP module into a static-protective package.
6. Replace the protective cap on the port.
Using LC-LC fibre-channel cables
The LC-LC fibre-channel cable is a fiber-optic cable that you use to connect
DS4700 fibre channel ports into one of the following devices:
v
An SFP module installed in a fibre channel switch port
v An SFP module of the host bus adapter port
v An SFP module installed in an IBM
®
DS4000 storage expansion enclosure
See Figure 24 on page 37 for an illustration of the LC-LC fibre-channel cable.
For more information about cabling these devices, see the documentation that
comes with the LC-LC fibre-channel cable.
Protective cap
SFP module
10
o
Plastic tab
Figure 22. Unlocking the SFP module latch - plastic variety
Protective
cap
SFP
module
90
o
Wire
tab
Figure 23. Unlocking the SFP module latch - wire variety
36
IBM TotalStorage DS4300 Fibre Channel Storage Subsystem: Installation, User’s, and Maintenance Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|