IBM TotalStorage DS4300 Turbo, Инструкция по установке, использованию и обслуживанию

Страница: 37 / 220

– One power cord on Model 6LU/6LX
v Two fan units.
v 14 filler panels.
v
Rack-mounting hardware kit (1):
– Two rails (right and left assembly)
– Ten M6 screws
– Ten M6 cage nuts
– Ten M6 clip nuts
v LC wrap plug and coupler kit for Fibre Channel link diagnostics. (For more
information, see the DS4000 Problem Determination Guide .)
Software and documentation:
v IBM DS4000 Storage Manager software:
Version CD including client and firmware, and online help and publications in
Adobe Acrobat Portable Document Format (PDF).
For a list of available IBM DS4000 publications, see Table 2 on page xix.
The latest version of the DS4000 Storage Manager software and the DS4000
product publications are available at the DS4000 System Storage support Web
site:
http://www-1.ibm.com/servers/storage/support/disk/
v Rack Mounting Assembly kit, including:
– IBM TotalStorage DS4300 Installation, User's, and Maintenance Guide
– IBM TotalStorage DS4300 Storage Subsystem Cabling Guide
– Statement of Limited Warranty
– IBM Machine Code License Agreement
– IBM Safety Manual
– Rack mounting installation instructions
– Rack mounting template (for aligning the rails properly)
– White tape dots for marking the holes in the rack
If an item is missing or damaged, contact your IBM reseller or your IBM marketing
representative.
If you have not already done so, record your storage subsystem serial number in
the table in Appendix A, “Records,” on page 155.
Handling static-sensitive devices
Attention: Static electricity can damage electronic devices and your system. To
avoid damage, keep static-sensitive devices in their static-protective package until
you are ready to install them.
To reduce the possibility of electrostatic discharge (ESD), observe the following
precautions:
v Limit your movement. Movement can cause static electricity to build up around
you.
v Handle the device carefully. Hold it by its edges or its frame.
v Do not touch solder joints, pins, or exposed printed circuitry.
Chapter 1. Introduction
9
|
|
|