IBM TotalStorage DS4100, Инструкция по установке, использованию и обслуживанию

Страница: 153 / 180

Appendix B. Rack mounting template
This appendix provides duplicate copies of the rack mounting templates. If you want
to tear out the templates from this document for easier use, use these copies rather
than those provided in “Rack mounting template” on page 20.
Use the following templates (Figure 80 on page 122 and Figure 81 on page 123) to
identify the proper locations for inserting M6 screws when mounting the support
rails and DS4100 in a rack cabinet. The locations for the M6 screws are highlighted
in the templates.
The DS4100 is 3 U high. Align the template with the rack at a U boundary. U
boundaries are shown as horizontal dashed lines in the rack mounting templates.
Note: The mounting holes that are shown in the following templates are square.
The holes in your rack cabinet might be round or square.
© Copyright IBM Corp. 2004
121