IBM TotalStorage 3494 Tape Library, Руководство оператора

Страница: 409 / 605

press Ctrl + Esc. If the Specialist is enabled and running, 3494 TotalStorage
Specialist will be in the window list. Press Esc to close the window list.
Note: You cannot enable the Specialist from the Specialist. You must do
this at the Library Manager.
If the Enable option is unavailable, the Specialist has already been enabled.
At this time, the Disable option is available.
If the Specialist (Web server) option in the Commands window is
unavailable, the Library Manager operating system either is not at the
proper level or does not have enough memory to support the Web server.
The Specialist cannot be started.
Establishing Userids
The default userid and password are webadmin and webadmin . In order to use any
control functions on the Web Specialist, the default userid must be activated from
the Library Manager. To activate the webadmin userid, do the following:
1. Select Commands .
2. Select 3494 Specialist (Web Server) .
3. Select Settings .
4. Select the Activate push button.
5. Wait for the message that the Web Administrator Userid was activated.
Attention: It is recommended that the default password be changed immediately
following activation of the userid.
To change a user’s password (including webadmin ), do the following:
1. Access the Specialist Web interface.
2. Select Manage security .
3. Select Change User Password .
Users can also modify their own passwords by completing the above procedure.
The Specialist allows certain control functions to be performed from a remote
location. These functions are protected by secure userids and passwords. When one
of these restricted access functions is selected, you will be prompted for a userid
and password. You are only required to log in once per browser session.
Attention: You will remain logged in until you exit your browser entirely.
To add additional users, do the following:
Note: The maximum number of users is 48.
1. Access the Specialist Web interface.
2. Select Manage security .
3. Select Administer Users .
4.
Add the appropriate userids and passwords. Userids or passwords must be a
one to eight-alphanumeric character name. They are not case sensitive.
It is recommended that the webadmin userid be deactivated after the individual
userids have been established. The webadmin userid is a superuser ID. There
should be limited access to the password. To deactivate the webadmin userid, do
the following:
Chapter 6. Advanced Operating Procedures
383