IBM TotalStorage 3494 Tape Library, Руководство оператора

Страница: 398 / 605

Table 18. Operator Intervention Messages and Parameters (OPINT TRAP Type) (continued)
OPINT # Parameter [A] Parameter [B] Parameter [C]
Actual Library Manager OPINT Trap
Message
155 Device — — Device [A] configured incorrectly. 3592 E05
Tape Drive must er set to emulate a 3592
J1A.
300 — — — One or more logical volumes have
corrupted tokens. Call service. (VTS z)
301 — — — Previous Peer-to-Peer Logical Volume
Restore did not complete. Call service.
302 Volser — — Volser
[A]
is damaged.
303 Volser — — Volser
[A]
is in the manual eject category.
304 Port # — — VTS ADSM port
[A]
failed. Call service.
305 # Errors Volser — More than
[A]
errors encountered for
stacked volume [B] .
306 Pool # — — Pool [A] has stacked volumes of different
media classes and was reset to default
values.
307 # Volumes # Volumes — VTS attempted High Capacity Cache Option
with [A] volumes, but [B] volumes already
exist.
308 — — — Virtualization engine (VE) has been
taught/configured incorrectly as a VTS.
309 — — — VTS has been taught/configured incorrectly
as a VE.
400 — — — * The library is out of ETC cleaner
cartridges.
401 Cartridge type Volser — [A] cleaner cartridge [B] was ejected due to
maximum use.
402 Percent Accessor — [A] percent of mounts performed by
Accessor-
[B]
over the past hour required
excessive mount recovery. Call service.
403 Percent Accessor — [A] percent of mounts performed by
Accessor-
[B]
over the past 24 hours
required excessive mount recovery. Call
service.
404 Device Percent Accessor Device
[A]
required excessive mount
recovery ( [B] percent of mounts) over the
past hour (Accessor-
[C]
). Call service.
405 Device Percent Accessor Device
[A]
required excessive mount
recovery ( [B] percent of mounts) over the
past 24 hours (Accessor- [C] ). Call service.
406 LMA or LMB — — Logging is degraded on [A] . Call service.
407 LM Return Code TSMC Return
Code
— Communication with the TSMC has failed
(LM rc =
[A]
, TSMC rc =
[B]
). Call service.
408 LMA or LMB Return Code —
[A]
: TSMC configuration has failed (rc =
[B] ). Call service.
412 Volser — — Volser [A] has been returned to the station.
A service cartridge cannot be inserted via
CIO or HCIO.
372
3494 Tape Library Operator Guide