IBM TotalStorage 2109 M12, Руководство пользователя

Страница: 73 / 87

loop master timeout value (LM_TOV). The minimum
time that the loop master waits for a loop initialization
sequence to return.
loop mode. One of the modes for a loop port (L_port).
An L_port is in loop mode when it is in an arbitrated
loop and is using loop protocol. An L_port in loop mode
can also be in participating mode or nonparticipating
mode. See also loop port , fabric mode , participating
mode , and nonparticipating mode .
loop port (L_port). A node port (NL_port) or fabric
port (FL_port) that has arbitrated loop capabilities. An
L_port can be either in fabric mode or loop mode. See
also fabric mode , loop mode, nonparticipating mode,
and participating mode.
loop port state machine (LPSM). The logical entity
that performs arbitrated loop protocols and defines the
behavior of loop ports (L_ports) when they require
access to an arbitrated loop.
L_port. See loop port .
LPSM. See loop port state machine .
LSR. Link state record.
LSU. Link state update.
LUN. See logical unit number .
LWL. See long wavelength .
M
MAC. Media access controller.
MAC address. See Media Access Controller address .
management information base (MIB). A simple
network management protocol (SNMP) structure to help
with device management, providing configuration and
device information.
master port. As relates to trunking, the port that
determines the routing paths for all traffic flowing
through the trunking group. One of the ports in the first
inter-switch link (ISL) in the trunking group is designated
as the master port for that group. See also ISL
Trunking .
Media Access Controller address. The hardware
address of a device connected to a shared network
medium.
MIB. See management information base .
modem serial port. The upper serial port on the
control processor card (CP card). Can be used to
connect the CP card to a modem with a standard 9–pin
modem cable. Consists of a DB–9 connector wired as
an RS–232 device, and can be connected by serial
cable to a data communications equipment (DCE)
device. A Hayes-compatible modem or Hayes-emulation
is required. The device name is ttyS1. See also data
communications equipment port and terminal serial port .
multicast. The transmission of data from a single
source to multiple specified node ports (N_ports), as
opposed to all the ports on the network. See also
broadcast and unicast .
multimode. A fiber optic cabling specification that
allows up to 500 m (1640.5 ft) between devices.
N
name server. Frequently used to indicate Simple
Name Server. See also simple name server .
NEMA. National Electrical Manufacturers Association.
NL_port. See node loop port .
NMS. Network Management System.
node. A Fibre Channel device that contains a node
port (N_port) or node loop port (NL_port).
node loop port (NL_port). A node port that is loop
capable. Used to connect an equipment port to the
fabric in a loop configuration through a fabric loop port
(FL_port).
node name. The unique identifier for a node,
communicated during login and port discovery.
node port (N_port). A node port that is not loop
capable. Used to connect an equipment port to the
fabric.
nonparticipating mode. A mode in which a loop port
(L_port) in a loop is inactive and cannot arbitrate or
send frames, but can retransmit any received
transmissions. This mode is entered if there are more
than 127 devices in a loop and an arbitrated loop
physical address (AL_PA) cannot be acquired. See also
participating mode .
nonvolatile random access memory (NVRAM).
Random access memory (storage) that retains its
contents after the electrical power to the machine is
shut off. A specific part of NVRAM is set aside for use
by the system ROS for the boot device list.
N_port. See node port .
NVRAM. See nonvolatile random access memory .
Nx_port. A node port that can operate as either a
node port (N_port) or node loop port (NL_port). See
also node port and node loop port .
Glossary
51