IBM ThinkPad 755CX, Руководство пользователя

Страница: 121 / 296

Maximizing the Battery-Powered Operation
WIN
When you use Windows, do the following to check and install
APM for Windows:
1. Start the system. Make sure that the current directory has
Windows (usually C:\WINDOWS>).
2. Type SETUP at the command prompt and press Enter.
The following screen appears.
Windows Setup
=============
If your computer or network appears on the Hardware Compatibility List
with an asterisk next to it, press F1 before continuing.
System Information
Computer: MS-DOS System
Display: WD9 C24 64 x48 256 colors small fonts
Mouse: Microsoft, or IBM PS/2
Note:
If “MS-DOS System with APM”
appears for the item “Computer:”,
APM is already installed. Press F3
to exit the setup. 3. Using the Arrow keys (
↑
,
↓
), position the highlighted cursor
over MS-DOS
**
System and press Enter.
4. Position the highlighted cursor over MS-DOS System with
APM and press Enter.
5. Verify that the item Computer has changed to
MS-DOS System with APM on the screen. If not, return to
step 3.
Windows Setup
=============
If your computer or network appears on the Hardware Compatibility List
with an asterisk next to it, press F1 before continuing.
System Information
Computer: MS-DOS System with APM
Display: WD9 C24 64 x48 256 colors small fonts
Mouse: Microsoft, or IBM PS/2
6. Press Enter to install APM.
7. Restart the system to make APM effective.
Decreasing LCD Brightness
Adjust the brightness control on the LCD to the lowest level possible
that allows you to comfortably view the screen. This is an effective
way of conserving battery power.
Chapter 4. Using Battery Power
105