IBM ThinkPad 755CX Скачать руководство пользователя страница 111

Страница: 111 / 296

Replacing the Battery Pack

Warning:

If you are using PC Cards, either
connect the AC Adapter, or stop
the PC Card application and
remove the PC Cards before
doing these steps.

A spare battery pack is available as an option. Replace the current
battery pack when its power becomes low.

The battery pack can be replaced with computer power on or off.
To replace the battery pack without turning off the computer, do the
following:

Note:
Make sure the locking lever for the
hard disk drive is unlocked.

Open the LCD; then open the keyboard. The computer
automatically enters suspend mode and:

One beep is heard.

The suspend indicator

blinks; then glows steadily.

When the computer has entered suspend mode, pull the
battery pack toward the front of the computer; then
remove it.

Quickly install a fully charged battery pack.

Note:
If the computer does not resume
normal operation, press the Fn key.

Close the keyboard.

The computer resumes normal operation.

Chapter 4. Using Battery Power

Содержание ThinkPad 755CX









































































































































































































































































































Результаты поиска

Содержание ThinkPad 755CX

Отзывы:

Бренды по названию

Популярные бренды

IBM ThinkPad 755CX, Руководство пользователя

Результаты поиска

Содержание ThinkPad 755CX

Отзывы:

Бренды по названию

Популярные бренды