IBM System Storage TS3500, Введение и руководство по планированию

Страница: 85 / 290

The customer rack-mountable TSSC (FC 2732) comes with serial cables and a
Keyboard Video Mouse (KVM). Feature code 2733 installs one internal modem in
the TSSC. The TSSC is preloaded with software and is tested prior to shipment.
When the TS3500 Tape Library is in an environment that includes a system
console, IBM recommends that the library perform the Electronic Customer Care
(ECC) Call Home function through the system console instead of through a direct
modem connection.
To perform an ECC Call Home operation through a system console, the TS3500
Tape Library sends Call Home information across a private Ethernet connection to
the system console. The system console then performs the ECC Call Home
operation and sends the information to the IBM Remote Technical Assistance
Information Network (RETAIN) through the system console's modem or Ethernet
(broadband) connection.
For remote support through a system console, the TS3500 Tape Library needs a
minimum of two Ethernet ports: one attached to your network for use by your
administrator and one attached to the private system console network for remote
support. New frame models L23 and L53 provide two Ethernet ports per frame so
no additional features are necessary. Frame models L22, L32, and L52 require an
Lx3 model conversion or the enhanced node card feature (FC 1700) in order to
support the dual Ethernet port requirement.
The library feature code 9217 provides an Ethernet cable for the remote support
connection from the TS3500 Tape Library to a system console.
Figure 13 on page 62 shows the attachment of a system console to the TS3500 Tape
Library for remote support. (Refer to Table 17 on page 62.)
Chapter 1. Introduction
61