IBM System Storage TS3500, Введение и руководство по планированию

Страница: 151 / 290

Power cords for Models L22, D22, L52, and D52
This section describes the power cords used with models L22, D22, L52, and D52
of the TS3500 Tape Library.
Refer to Figure 30 on page 128 and match the number that is beside each receptacle
to the receptacle number listed in the table.
Table 49. Specifications for power cords used with the IBM System Storage TS3500 Tape Library, Models L22, D22,
L52, and D22
Length and Type of Power Cord
Part Number
and Feature
Code
Type of Service Receptacle
4.3 m (14 ft) international 250 V ac, 30 A. This is
the default power cord, if no other feature is
specified, in all countries except the United
States, Canada, Japan, Korea, Philippines, and
Taiwan.
46F6063 or
23R2333 / 9960
No connector (a connector can be attached per
local requirements)
1.8 m (6 ft) watertight, 250 V ac, 30 A (used in
Chicago, Illinois, U.S.)
46F4593 / 9961
Russellstoll 3753 or 9R33UOW receptacle, or a
Russellstoll 3933 or 9C33UO connector
(receptacle 5)
4.3 m (14 ft) non-watertight, twistlock 250 V ac,
30 A. This is the default power cord if no other
feature is specified in the United States, Canada,
Japan, Korea, Philippines, and Taiwan.
11F0113 / 9962 NEMA L6-30R (receptacle 3)
4.3 m (14 ft) watertight, 250 V ac, 30 A (used in
U.S., Canada, Asia/Pacific)
46F4594 / 9963
Russellstoll 3753 or 9R33UOW receptacle, or a
Russellstoll 3933 or 9C33UO connector
(receptacle 5)
1.8 m (6 ft) non-watertight, 110 V ac, 20 A (used
in Chicago, Illinois, U.S.)
19P5904 / 9964 NEMA L5-20R (receptacle 1)
4.3 m (14 ft) non-watertight, 110 V ac, 20 A
(used in the U.S. and Canada only)
19P5903 / 9965 NEMA L5-20R (receptacle 1)
Dual 4.3 m (14 ft) non-watertight, international
250 V ac, 16 A single phase. This power cord is
used In all countries except the United States,
Canada, Japan, Korea, Philippines, and Taiwan.
If no other feature is specified, this is the default
power cord that is supplied when the dual ac
power feature (1901) is ordered.
36L8823 / 9970 IEC-309 2P +GND 16 A (receptacle 6)
Dual 1.8 m (6 ft) watertight, 250 V ac, 15 A
(Used in Chicago, Illinois, U.S.)
86F2645 / 9971
Russellstoll 3743U2 or 9R23U2W receptacles, or
Russellstoll 3913U2 or 9C23U2 connectors
(receptacle 4)
Dual 4.3 m (14 ft) non-watertight, twistlock 250
V ac, 15 A. This is the default power cord if no
other feature is specified in the United States,
Canada, Japan, Korea, Philippines, and Taiwan.
14F1550 / 9972 NEMA L6-15R (receptacle 2)
Dual 4.3 m (14 ft) watertight, 250 V ac, 15 A.
This feature is available in the United States,
Canada, Japan, Korea, Philippines, and Taiwan.
86F2646 / 9973
Russellstoll 3743U2 or 9R23U2W receptacles, or
Russellstoll 3913U2 or 9C23U2 connectors
(receptacle 4)
Dual 1.8 m (6 ft), 110 V ac, 20 A (Used in
Chicago, Illinois, U.S.)
12J5115 / 9974 NEMA L5-20R (receptacle 1)
Dual 4.3 m (14 ft), 110 V ac, 20 A (Used in U.S.
and Canada only)
12J5117 / 9975 NEMA L5-20R (receptacle 1)
Chapter 2. Physical planning specifications
127