IBM System Storage TS3500, Введение и руководство по планированию

Страница: 167 / 290

5. Required when you have 1 to 2 frames and you want to add frames for a total
of 3 to 6 frames. This requirement does not apply to a library that contains
dual accessors.
6.
Required when you have 7 to 16 frames and you want to remove frames for a
total of 3 to 6 frames. This requirement does not apply to a library that
contains dual accessors.
7. Required when you have 1 to 6 frames and you want to add one frame for a
total of 7 frames. This requirement does not apply to a library that contains
dual accessors.
8. Required when you have 1 to 6 frames and you want to add frames for a total
of 8 to 14 frames. This requirement does not apply to a library that contains
dual accessors.
9.
Required when you have 8 to 16 frames, when you have feature code 1816 or
9316 installed, and when you want to remove frames such that you have a
total of 7 frames. This requirement does not apply to a library that contains
dual accessors.
10. Required when you have 1 to 14 frames, when feature code 9316 is not
installed, and when you want to add frames for a total of 15 to 16 frames.
This requirement does not apply to a library that contains dual accessors.
11. Must be added to any IBM System Storage TS3500 Tape Library that comes
from the plant and has 15 to 16 frames (14 or 15 Model D22, 32, or 52
expansion frames attached to the Model L22, 32, or 52). This requirement does
not apply to a library that contains dual accessors.
12.
Maximum limit of 3 per subsystem (no mixed media support). These feature
codes assume that the 4-I/O door frame is installed at the end of the library
string. ("String" refers to the very last frame in a single accessor library or the
last frame before SBB in HS for both HA and single accessor libraries.) If the
customer prefers that the 4-I/O door frame be installed elsewhere in the
string, the service representative must obtain a "Services Contract" to uninstall
additional frames as necessary to accommodate the customer's request.
13. This feature (FC 9679) indicates that one 3588 Tape Drive Model F3A or F3B
will be field installed into a 3584 Model D32, D52, D53, L32, L52, or L53. If it
is added to the order of a new 3584 frame coming from the plant, it indicates
that the drive will be installed in the field rather than at the plant. Installation
of a 3588 Tape Drive canister requires that a LTO Fibre Drive Mounting Kit
feature (FC 1504 on the Model D32, D52, L32, or L52; FC 1514 on the Model
D53 or L53) be installed in the 3584 Frame to contain the canister. The 3588
Model F3A or F3B Tape Drive must be separately ordered through FC 9679.
Because the 3588 Tape Drive is designated as customer setup, if assistance is
required to field install the drive, the 3588 Tape Drive Field Install Assist
feature (FC 1678) should be ordered.
14. The quantity of the LTO Fibre Drive Mounting Kit feature (FC 1504 or FC
1514) must be equal to or greater than the quantity of LTO Fibre Channel Tape
Drives installed (FC 9678, FC 9679, FC 9681, FC 9682, 9684, and FC 1479) plus
Fiber Channel tape drives reinstalled with feature FC 1665).
15. The quantity of the 3592 Fibre Drive Mounting Kit feature (FC 1503, FC 1513
or FC 1515) must be equal to or greater than the quantity of 3592 tape drives
installed (FC 1674, FC 1675, FC 9677, FC 9680, FC 9683, or FC 9692.)
16.
In order to support Ultrium 5 tape drives in any library configuration, or to
support more than 6 887 slots in an xx2 library with an Sx4 frame, all node
cards in the library must be xx3-equivalent node cards. This requires a xx3
model conversion OR the Enhanced Node Card(s) feature (FC 1700 or 1701).
Chapter 3. Standard features of the Library
143