IBM Storwize V3700, Быстрое руководство по установке

Страница: 70 / 82

9. If the system initialization completed successfully, click Finish . If you have a
network connection to the Storwize system, the system management GUI is
displayed.If the workstation does not have a network connection to the
Storwize system, go to the workstation you will use to manage the system
and start a supported browser. Direct the browser to the management address
you specified for the system.
10. Log in with user name
superuser
and password
passw0rd
.
Note: The
0
character in the password is a zero, not the letter O.
11. Follow the on-screen instructions to begin setting up your system.
Note:
The other options that are available in the initialization tool are used to
recover the service IP address or the superuser password.
Adding an expansion enclosure to an existing system
When adding an expansion enclosure to an existing system, you must use the
Storwize management GUI to update the system configuration.
About this task
The management GUI requires a supported web browser (see “Web browser
requirements to access the management GUI” on page 45).
Procedure
To add an expansion enclosure to your system, complete the following steps.
1. Install support rails for the new enclosure (see “Installing the support rails” on
page 11).
2. Install the new enclosure in the rack (see “Installing the enclosures” on page
16).
3. Connect the expansion enclosure attachment cables (see “Connecting SAS
cables to expansion enclosures” on page 34).
4. Connect the power cables and wait for the SAS LEDs to illuminate (see
“Powering on the system” on page 42).
5.
Start the management GUI.
6. Select Monitoring > System Details .
7.
Select the system name in the tree.
8. Select Actions > Add Enclosures > Expansion only .
9. Continue to follow the on-screen instructions.
50
Storwize V3700: Quick Installation Guide
|
|
|
|
|
|
|
|
|
|
|
|