Installing the enclosures
Following your enclosure location plan, install the control enclosure (and,
optionally, one or more expansion enclosures).
About this task
CAUTION:
v
To lift and install the enclosure into the rack requires at least two people.
v
Load the rack from the bottom up to ensure rack stability. Empty the rack
from the top down.
Procedure
To install an enclosure, complete the following steps.
1.
Align the enclosure with the front of the rack cabinet.
2.
Carefully slide the enclosure into the rack along the rails until the enclosure is
fully inserted (see Figure 11).
Note:
The rails are not designed to hold an enclosure that is partially inserted.
The enclosure must always be in a fully inserted position.
3.
On either side of the drive assemblies, remove the enclosure end caps by
grasping the handle and pulling the bottom of the end cap free, then clearing
the tab on the top of the enclosure.
4.
Secure the enclosure with a screw in the rack mounting screw hole.
v3500047
Figure 11. Inserting the enclosure
16
Storwize V3700: Quick Installation Guide
|
|
|
Содержание Storwize V3700
