IBM Storwize V3700, Быстрое руководство по установке

Страница: 68 / 82

v
Do not use this procedure when adding an expansion enclosure to an existing
system.
Procedure
To initialize the system, complete the following steps.
1. Gather the information you will use to configure the system.
v You must have the IP network address you will use to manage the system.
– IP address
– Subnet mask
– Gateway
v
Other information is optional, but useful for enabling additional
capabilities.
– The IP address of a Network Time Protocol (NTP) server for automated
setting of date and time
– The IP address of a simple mail transfer protocol (SMTP) server for
sending notificatication of alerts
2. Locate the USB flash drive that was shipped with your order in the
documentation package.
3. Insert the USB flash drive into a USB port on the personal computer.
4. Open a terminal window.
5. Locate the root directory of the USB flash drive. The root directory is usually
located in the
/Volumes/
directory.
6.
Type:
sh InitTool.sh
The initialization tool wizard starts.
7. In the wizard, click Next and select Create a new system .
8. Follow the on-screen instructions given by the initialization tool. You will be
instructed to complete the following actions:
a. Enter the details of the system management address you wish to use.
b. Take the USB flash drive to the Storwize system and allow it to initialize.
c. Return the flash drive to the workstation to check that the initialization
completed.
9. If the system initialization completed successfully, click Finish . If you have a
network connection to the Storwize system, the system management GUI is
displayed.If the workstation does not have a network connection to the
Storwize system, go to the workstation you will use to manage the system
and start a supported browser. Direct the browser to the management address
you specified for the system.
10. Log in with user name
superuser
and password
passw0rd
.
Note: The
0
character in the password is a zero, not the letter O.
11. Follow the on-screen instructions to begin setting up your system.
Note: The other options in the initialization tool are used to reset the service
IP address or the superuser password.
Initializing the system with a Linux computer
To initialize a new system with a Linux computer, use the initialization tool that
was shipped with your order.
48
Storwize V3700: Quick Installation Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|