IBM ServeRAID M5025, Руководство пользователя

Страница: 56 / 86

5-6 Installing the Intelligent Battery Backup Unit
3. Insert the battery pack harness at the end of the 5-pin cable into the
J4 connector on the backside of the iBBU.
4. Use the supplied 20-pin, 10-inch cable to connect the J2 connector
on the iBBU to the J6B1 BBU connector on the controller, as shown
in
Figure 5.4 .
There are black triangles on the connectors to help you install them
properly. Insert the cable connectors into the controller connector
and the iBBU connector so that the black triangles are aligned, as
shown in
Figure 5.4 .
Figure 5.4 Connecting the iBBU Remotely to the ServeRAID
M5025 SAS/SATA Controller
85040-13