IBM SAN Volume Controller 2145-CF8, Руководство по установке оборудования

Страница: 80 / 101

supply.
SAN Volume Controller 2145-CF8 ports used during service
procedures
The SAN Volume Controller 2145-CF8 contains a number of ports that are only
used during service procedures.
Figure 45 shows ports that are used only during service procedures.
1
System management port
2
Two monitor ports, one on the front and one on the rear
3
Four USB ports, two on the front and two on the rear
During normal operation, none of these ports are used. Connect a device to any of
these ports only when you are directed to do so by a service procedure or by an
IBM service representative.
SAN Volume Controller 2145-CF8 unused ports
The SAN Volume Controller 2145-CF8 can contain one port that is not used.
Figure 46 on page 55 shows the one port that is not used during service procedures
or normal use.
Ground
Live
Neutral
Figure 44. Power connector
svc00227cf8
3 1
2
3
2
Figure 45. Service ports of the SAN Volume Controller 2145-CF8
54
IBM System Storage SAN Volume Controller: Model 2145-CF8 Hardware Installation Guide