IBM SAN Volume Controller 2145-CF8, Руководство по установке оборудования

Страница: 37 / 101

v
Optional feature code 4601 ships installed in the SAN Volume Controller
2145-CF8 node, quantity 1
v
Feature code 8115 ships in a separate box that is labeled part number
31P1319. Verify that this box contains the following items:
– 2145 UPS-1U, quantity 1
– 2145 UPS-1U output power-cable retention-bracket kit, quantity 1
– Uninterruptible power-supply rail kit, quantity 1
– Power cable for connection of the uninterruptible power supply to a rack
PDU, quantity 1
– Multilingual battery-reconnection flyer and other miscellaneous flyers
v
Optional feature code 8300 ships in a box within the main box. Verify that
the box contains the following items:
– Part number 95P5083: redundant ac-power switch, quantity 1
– Part number 31P0966: power cables, quantity 2
– Part number 96P1728: mounting plates, quantity 2
– Part number 12J5289: hex head screws, quantity 4
– Part number 00N8709: “c” clips, quantity 4
– Part number 24R0207: other screws, quantity 6
– Part number 31P0876: label set, quantity 1
If feature codes 5301 or 5325 were not ordered, the customer must supply their
own fiber-optic or twisted-pair fibre-channel cables. Make sure that four cables
per node are available.
Note: Part numbers are subject to change between SAN Volume Controller
releases. The part numbers listed here might not always reflect what the
customer has received.
4. Read the “Safety and environmental notices” on page ix to ensure that you are
correctly installing the 2145 UPS-1U units.
Optionally installing the redundant ac-power switch
Use the redundant ac-power switch to make the SAN Volume Controller cluster
more resilient to power failure.
DANGER
Multiple power cords: The product is equipped with multiple power cords.
To remove all hazardous voltages, disconnect all power cords. (L003)
or
svc00322
1 2
Chapter 2. Installing the SAN Volume Controller 2145-CF8 hardware
11